3. Order hose kits part no. HO51XX (items 2 and 3). The last two digits correspond to the length of hose.
Figure D. Dual front mount cylinders Note: cylinder body moves.
Figure E. Dual side mount cylinders Note: cylinder body stationary.
Figure 10-9.
NOTICE! This configuration also requires the purchase of Tee fitting kit # HF5530.
10.2.6 How to measure hoses; single station, single cylinder, with bulkhead
Helm to steering cylinder. Using the illustrations below: 1. Measure from center of steering wheel to the starboard side wall. 2. Measure the intended path of the hoses from the starboard side wall to the center of the engine. 3. Round up the measurement to the nearest ‘even’ number and add 2 feet (0.6m). This is the length of the bulkhead hose kit required. 4. Refer to table 10-3 on page 10-5 to select a style of hose kit (item 4). The last two digits correspond to the length of hose.
Figure F. Single front mount cylinder Note: cylinder body moves.
Figure G. Single side mount cylinder Note: cylinder body stationary.
Figure 10-10.
10-7
EN
Made with FlippingBook - Online Brochure Maker