10.2.7 How to measure hoses; single station, dual cylinders, with bulkhead Helm to hose tee fittings. Using the illustrations below: 1. Measure from center of steering wheel to the starboard side wall. 2. Measure from the starboard side wall to the transom. 3. Measure from the transom to your hose tee fittings (item 6). 4. Round up the measurement to the nearest ‘even’ number. This is the length of hose kit required. 5. Order hose kit part no. HO51XX (item 1). The last two digits correspond to the length of hose.
Hose tee fittings to steering cylinders. Using the illustrations below: 1. Measure the intended path of the hoses from the tee fitting (item 6) to the center of the PORT side engine. 2. Round up the measurement to the nearest ‘even’ number and add 2 feet (0.6m). This is the length of hose kit required. 3. Order bulkhead hose kits part no. HO81xx (items 4 and 5). The last two digits correspond to the length of hose.
Figure H. Dual front mount cylinders Note: cylinder body moves.
Figure I. Dual side mount cylinders Note: cylinder body stationary.
Figure 10-11.
NOTICE! This configuration also requires the purchase of Tee fitting kit # HF5530.
10.2.8 Part numbers for figures A, B, C, D, E, F, G, H, and I
ITEM # PART # DESCRIPTION 1
HO51XX HO51XX HO51XX HO81XX HO81XX HF5530
Hose kit Hose kit Hose kit
2 3 4 5 6
Bulkhead hose kit (see Section 10.2 , and 10.3) Bulkhead hose kit (see Section 10.2 , and 10.3) Tee fitting kit (3 per kit)
Table 10-4.
NOTICE! See section 10.5 ‘Fittings and Fitting Kits’ for add a station and/or autopilot fitting kits.
10-8
EN
Made with FlippingBook - Online Brochure Maker