NOTICE! a) All hoses should be routed with a gradual rise so that air will not be trapped in the lower station. b) Some installations require more than 1 hose kit and additional fitting kits. c) Minimum bend radius for hose is 2-1/2” (6 cm). d) A compensating line is required between helm stations or the helm and autopilot power pack. 10.3.1 Additional steering station or autopilot power pack 1. Determine the location of the 2nd station or power pack. 2. Measure along the intended path of the hose routing from the upper helm pump to the 2nd station or autopilot power pack. 3. Round up the measurement to the next even digit. This is the length of hose kit required. 4. Order hose kit(s) part number HO51XX the last two digits correspond to the length of hose. 10.3 Additional stations or autopilot integration
WARNING! Do not cut hydraulic hose.
Figure J. 2nd steering station or autopilot power pack installation
UPPER HELM STATION AUTOPILOT DETAIL
2ND HELM STATION OR AUTOPILOT
COMPENSATING LINE
Figure 10-12.
Parts list for figure J
ITEM # PART # DESCRIPTION
QTY. REQ.
1 2 1 1 Table 10-5. * Includes 25’ of 3/8” dia. nylon tubing to be used for the compensating line only. HO51XX HF6007 Hose kit Fitting kit* (For use with -3 helms only)
NOTICE! For NPT helm pumps use kit # HF5501.
10-9
EN
Made with FlippingBook - Online Brochure Maker