10.4.3 Determining the required length of tubing for single station configurations From the illustrations (figures A and B), select the situation which best suits your application and note; a) the type of drive system, and b) the number of steering stations. Single station 1. From the illustration which best suits your application note the number of lengths of tubing and fitting kits required. 2. Measure along the intended path of tube routing for each of the tubing runs. 3. Determine if 3/8” nylon tube can be used or if copper tubing is required based on lengths of tubing runs required. 4. Total up the entire length of tubing required and round up to the next available tube kit length.
Figure A. Single inboard cylinder. Fittings required supplied with helm and cylinder.
Figure 10-13.
Figure B. Single sterndrive cylinder. Fittings required supplied with helm and cylinder.
Figure 10-14.
Parts list for figure A and B
ITEM # PART # DESCRIPTION
QTY. REQ.
1
3/8” dia. nylon or copper tube (or SeaStar hose)
As measured
Table 10-7.
10-11
EN
Made with FlippingBook - Online Brochure Maker