Required details for the addition of an autopilot 1. SeaStar Helm pumps are fitted with a built in check valve which are required for installations of additional steering stations and/or autopilot pumps. If your helm pump is not fitted with an internal check valve an external valve will be required. 2. Autopilot mfg. requires the volume of your steering cylinder(s) to provide an adequate autopilot pump, refer to page 8-15 for cylinder specifications. Outboard system fitting kit – part # HF6007 Application; add a 2nd station or autopilot to an outboard system. CAUTION! For use with -3 helms only. (For NPT helms use kit# HF5501.) NOTE HF6007 fitting kit is to be used when the system has been plumbed with SeaStar outboard steering hose only.
ALTERNATE HELM CONNECTION
UPPER HELM STATION
2ND HELM STATION OR AUTOPILOT
OUTBOARD HOSE KIT HO51XX
NOT INCLUDED IN HF6007 FITTING KIT, HOSES ARE TO BE PURCHASED SEPARATELY
Figure 10-18.
ITEM # PART # DESCRIPTION
QTY. PER KIT
1
343196 Tee Fitting, 1 End = -5 ORB, 1 end = 3/8” tube, center = 3/8” tube
2
2A 343088 Connector fitting, -5ORB — 3/8” tube
2
2B
600602 Connector fitting, 1/4” NPT — 3/8” tube
3
3
280327 Tube nut, 3/8” dia.
6
4
HA5432 Non-vented filler plug
1
5
HT5092 SeaStar nylon tube, 3/8” dia.
25ft
A*
Elbow, 3/8” tube (m) — -5 ORB
2
Table 10-9. * Supplied with helm pump.
10-15
EN
Made with FlippingBook - Online Brochure Maker