11.1.9 CANtrak display
On all multi-engine systems (optional on single-engine systems) a color display at the main helm station shows system status and fault notifications. When enabled by the dealer or builder it can also be used to make adjustments to steering parameters. A CANtrak display may also be installed at additional helm stations. The CANtrak display is supplied with a plastic cover to protect it from the weathering effects of sunlight. Remove and stow the cover before using the boat, and replace it when finished.
Figure 11-11. CANtrak display.
11.1.10 Dash panel (single-engine outboard vessels)
Single-engine outboard vessels may be equipped with a dash panel in place of the optional CANtrak display. System status and faults are indicated by a bi-color LED lamp and an audible buzzer. The button is used to mute alarms, re-activate steering after a recovered fault, and to cycle through five levels of brightness on the LED.
Figure 11-12. Dash panel.
WARNING! Do not operate the vessel without a functioning CANtrak display or dash panel warning lamp.
11-11
EN
Made with FlippingBook - Online Brochure Maker