• CAN2 is a high-speed network used to communicate with a third-party autopilot, and with a joystick and shift/throttle controls on an Optimus 360 joystick control system. Use of this network is optional on single- engine systems. • CAN3 is a public network using the NMEA 2000 protocol. The Optimus system broadcasts public messages onto this network and monitors the network for engine RPM.
COLOR CANtrak
ELECTRONIC HELM
BUZZER
ENGINE GATEWAY* 12V POWER
1A FUSE
OPTIONAL AUTOPILOT CCU*
EPS NETWORK (CAN1)
PRIVATE NETWORK (CAN2)
CAN1 HUB
P S
RUN
OFF
SWITCH PANEL*
ELECTRIC ACTUATOR
ELECTRIC ACTUATOR
BREAKER*
BREAKER*
–
–
+
+
STARBOARD POWER SOURCE*
PORT POWER SOURCE*
* COMPONENTS NOT SUPPLIED BY DOMETIC
Figure 11-13. Optimus EPS electric actuator system diagram, single station, twin engine.
11-13
EN
Made with FlippingBook - Online Brochure Maker