Overview The optional Optimus 360 joystick control system converts an operator’s inputs into steering, shift, and throttle commands using this three-axis joystick controller. The joystick can rotate, move forward and back, and side to side. Combinations of these movements give the operator precise control of the boat’s direction and speed. The Joystick is compatible with both electro/hydraulic and electric actuators. 11.3 Optimus 360 — joystick control 11.3.1
11.3.2 Joystick fundamentals
The joystick is the primary user interface for the optional Optimus 360 joystick control system. It offers the ultimate control of the vessel for docking and maneuvering at slow speeds and is especially useful in confined or difficult circumstances. It is intuitive to use, as the boat follows the actions of the handle. This section of the manual gives a detailed description of all of its capabilities and how to get the maximum benefit from this powerful feature. The Optimus 360 joystick quick reference guide, provided with the system, gives summary and reminder information on its operation and should be kept on the vessel at all times. NOTE While the joystick is active the turning resistance of the steering wheel will increase to remind the user that the helm is disengaged. Handle motion The handle can be moved in any direction or rotated left or right. When released the spring-loaded joystick will return to center and put the engine in neutral at idle throttle. Moving the handle away from center or rotating it will cause the engines to shift into the correct gear for the desired motion. Further handle motion in the same direction will apply throttle and provide more thrust in the chosen direction. The joystick is proportional and guided in each axis. Boost button Increases the power the engines can apply and may be turned on or off at any time. It can be very handy when handling the boat in wind or current. The system will remember the boost mode status so if it is left on, it will be on again next time the joystick is activated. A blue LED on the Boost button will illuminate when in boost mode. Take Command button Activates the joystick and allows the joystick to take control of the vessel when both control head levers are in the neutral position.
Figure 11-20.
11-20
EN
Made with FlippingBook - Online Brochure Maker