13.3.5
System configuration options Manual LED brightness adjustment
By default, the LED brightness is controlled automatically with an ambient light sensor. If manual control is preferred, you can disable the automatic function (see section 8.6) and adjust it manually. To adjust manually: Press and hold both the Favorite and Home buttons together. ✓ The status LED and the starboard position indicator LEDs will flash blue to indicate you are in manual brightness mode. (If they do not flash, the auto-brightness function has not been disabled.) ✓ As you continue to hold the buttons the brightness of the LEDs will
cycle through the five available levels. Release the buttons at the desired level.
Roll sensitivity adjustment The roll sensitivity refers to how much the tabs move for a given movement of the control dial. The default sensitivity will work for most users, but you can increase or decrease the sensitivity if desired.
Technical data
13.3.6
Connection voltage
12V DC nominal (9/16V min/max per SAE J1455)
Current draw at load
5.0A at 300 lbf (1340 N) 9.0A at 600 lbf (2680 N)
Max. static load, tension 1000lbf (4.4 kN) Max. static load, compression 1000lbf (4.4 kN) Weight, actuator
2.25” stroke: 3.6 lb (1.6 kg) 4.25” stroke: 3.9 lb (1.8 kg)
Weight, controller
.5 lb (.24 kg)
Weight, tab
Varies with tab, approximately .036 lb/square inch (2.54 g/ square cm) of tab, exclusive of brackets and hinges
Table 14-1.
Part numbers
13.3.7
DESCRIPTION
PART #
2.25" Kit — Stroke 11.5" standard actuator and controller, 9" x 12" standard tabs
STT3103R
2.25" Kit — Stroke 11.5" standard actuator and controller, 12" x 12" standard tabs
STT3105R
2.25" Kit — Stroke 11.5" standard actuator and controller, 12" x 9" standard tabs
STT3107R
2.25" Kit — Stroke 10" standard actuator and controller, 9" x 12" standard tabs
STT3131R
2.25" Kit — Stroke 10" standard actuator and controller, 12" x 12" standard tabs STT3133R 2.25" Kit — Stroke 11.5" standard actuator and controller, 12" x 12" edge mount tabs STT3205R 2.25" Kit — Stroke 11.5" standard actuator and controller, 12" x 9" edge mount tabs STT3207R 2.25" Kit — Stroke 10" standard actuator and controller, 12" x 12" edge mount tabs STT3231R 2.25" Kit — Stroke 10" standard actuator and controller, 12" x 9" edge mount tabs STT3233R 2.25" Kit — Stroke 11.5" standard actuator and controller, no tabs STT3601R 4.25" Kit — Stroke, 13" standard actuators and dial controller, harness, no tabs STT3701R Table 14-2. Reference information only, subject to change at any time.
13-7
EN
Made with FlippingBook - Online Brochure Maker