ENGINE TRIM CONTROL (OPTIONAL): Provides simultaneous trim control of all engines.
LEVER POSITION INDICATORS
NEUTRAL INDICATOR LAMPS: These lamps have four states: Steady green – engine is in neutral Slow flashing green (0.5s on, 0.5s off) – Neutral Throttle Warm-up is engaged Very slow flashing green (1s on, 2s off) – Trolling Mode is engaged Fast flashing red – A danger fault is active
Figure 15-3.
INDICATOR DIMMING FEATURE: When the control head is active, pressing Take Command repeatedly will cycle through five available indicator brightness levels.
TAKE COMMAND BUTTON AND LAMP: Used to activate a control head. To take command with a control head:
• Put control levers in neutral and press Take Command . • The adjacent lamp signals the transfer status as follows: Steady blue – station is active and in control of shift and throttle.
Flashing blue – station transfer from one station to another is underway. You have five seconds to match the control lever positions with those of the
active station to complete the transfer. Fast flashing blue – A warning fault is active. Lamp off – station is inactive
NOTE If the lamp does not come on when you press Take Command , Station Protection may be enabled. See section 14.1.8.
14-4
EN
Made with FlippingBook - Online Brochure Maker