Identification — Single lever (STM)
14.1.6
ENGINE TRIM CONTROL (OPTIONAL)
LEVER POSITION INDICATOR
INDICATOR DIMMING FEATURE: When the control head is active, pressing SEL repeatedly will cycle through the available indicator brightness levels. NEUTRAL INDICATOR LAMP: This lamp has four states: Steady green – engine is in neutral Slow flashing green (0.5s on, 0.5s off) – Neutral Throttle Warm-up is engaged Very slow flashing green (1s on, 2s off) – Trolling Mode is engaged Fast flashing green, with fast flashing amber – A danger fault is active
Figure 15-6.
SEL BUTTON: Used to activate a control head. To activate a control head: • Put control lever in neutral and press SEL . • The amber lamp signals the transfer status as follows:
Steady amber – station is active and in control of shift and throttle. Slow flashing amber – station transfer from one station to another is underway. You have five seconds to match the control lever positions with those of the active station to complete the transfer. Fast flashing amber – A warning fault is active. Lamp off – station is inactive NOTE If the lamp does not come on when you press SEL , Station Protection may be enabled. See section 14.1.8.
14-7
EN
Made with FlippingBook - Online Brochure Maker