14.1.8
Station selection and station select protection The way in which you activate a control station depends on whether the Station Select Protection (SSP) feature has been enabled. SSP prevents unauthorized or inadvertent activation of a control head and can only be enabled by an authorized dealer. By default, SSP is not enabled. SSP not enabled (default) On single station boats the control head is always active when the ignition is on, but on multi-station boats the control head must be activated. This can be done in two ways: • the Smart Select feature will automatically activate a control head if the levers are moved out of the neutral position. This feature only works when the ignition is first turned on. • the control head can be manually activated using the SEL button (STM control heads) or the Take Command button (DTM control heads) with the lever(s) in neutral. An active control head is indicated by an LED lamp: solid amber (STM) or solid blue (DTM). SSP Enabled When SSP is enabled there is no automatic activation of control heads. A specific sequence of button presses is always required to activate a control head. Dual lever control head: 1. Press Take Command twice. 2. Press N once. 3. Press Take Command again. 4. If the blue light turns on solid the station is active. 5. If the blue light flashes, match the lever position with the originally active station and the blue light will go solid to indicate that the transfer has been completed. Single lever control head: 1. Press SEL twice. 2. Press N once. 3. Press SEL again. 4. If the amber light turns on solid the station is active. 5. If the amber light flashes, match the lever position with the originally active station and the amber light will go solid to indicate that the transfer has been completed. WARNING! Until the blue (DTM) or amber (STM) light is on solid, the original active station retains control of the shift and throttle.
14-10
EN
Made with FlippingBook - Online Brochure Maker