3.1.4 BayStar outboard steering application guide (BayStar compact cylinders HC4645-3/47-3/48-3/58-3)
MANUFACTURER
YEAR
MODEL
CYLINDER NOTES
HONDA
1992–DATE 1996–DATE 2015–DATE 1998–2010 2003–DATE 2010–DATE 1991–DATE 1997–DATE 2017–DATE 1998–DATE 1984–DATE 1998–2007 2008–DATE 2008–DATE 2000–DATE 2000–DATE 2011–2013 1986–DATE 1987–2002 1990–2000 1998–DATE 2001–DATE 1990–DATE 2014–DATE 2023–DATE 1998–DATE 1998–DATE 1986–DATE 1997–DATE 2000–DATE 2011–2014 2014–DATE
30–50 HP 4-Stroke 75–90 HP 4-Stroke 100 HP 4-Stroke 115-130 HP 4-Stroke 135–150 HP 4-Stroke 115 HP 4-Stroke 40–150 HP inc. E-Tec 115 HP Ficht 75–150 HP Ficht 40–140 HP 4-Stroke 75–150 HP 40–60 HP 2-Stroke
HC4645-3 HC4645-3 HC4645-3 HC4647-3 HC4645-3 HC4645-3 HC4645-3 HC4658-3 HC4645-3 HC4658-3 HC4645-3 HC4648-3 HC5348-3 HC4645-3 HC4648-3 HC4645-3 HC4658-3 HC4645-3 HC4645-3 HC4645-3 HC4645-3 HC4658-3 HC4645-3 HC4645-3 HC4645-3 HC4645-3 HC4645-3 HC4645-3 HC4645-3 HC4648-3 HC4658-3 HC4645-3
See note 2
JOHNSON/EVINRUDE NOTE: Johnson 115 HP 2-stroke engines, required the pivot plate to be flipped. See note 4 below.
See note 2 See note 4 See note 5 See note 1, 2, 4 See note 5 See note 1, 2 See note 1 See note 2 See note 1, 2 See note 5
MERCURY/MARINER
40 HP 4-Stroke 60 HP 4-Stroke
SELVA
25-70 HP 4-Stroke 90-150 HP 4-Stroke 115 HP 4-Stroke 150 HP 2-Stroke 115–140 HP 2-Stroke 90–100 HP 2-Stroke 40–70 HP 4-Stroke 90–140 HP 4-Stroke 40–140 HP 2-Stroke 60–150 HP 4-Stroke 75–150 HP 4-Stroke 40–50 HP 2-Stroke 60 HP 2-Stroke 70–90 HP 2-Stroke 80–150 HP 4-Stroke 25–70 HP 4-Stroke 90–115 HP inc. A Series 90–115 HP inc. B Series
SUZUKI
See note 5 See note 1
See note 1, 2 See note 1, 4
See note 2
TOHATSU
Must use Tohatsu tiller bolt 3E0-84917-0
YAMAHA
See note 2 See note 3 See note 1 See note 5 See note 1, 2, 6
4. Cylinder HC4645-3 may be used in these applications. The pivot plate will need to be flipped before installation. Instructions provided with Owner’s Manual. 5. High performance 150HP engines and any engine using a 4-3/4" gear-case such as Command Thrust MUST use SeaStar. 6. May require Yamaha hook 688-48511-12-00 and M10 x 1.25 x 30 bolts.
1. Requires Spacer kit part # HO5090 2. Engine clamp brackets must be cut or ground, and the engine through bolted onto the transom, or interference will occur, restricting engine trim and tilt. 3. Steering hook Yamaha Part # 63D-48511-00-4D must be installed
Revision Date: MAY 31st 2023
NOTICE! HC4645-3 compact cylinder is included in the BayStar Steering kits. If your engine requires the use of a cylinder other than HC4645-3 or HC4658-3 then please refer to the figure below for additional replacement pivot plate.
HA4640 Comes with cylinder HC4645-3
HA4641 Converts HC4645-3 to HC4647-3
HA4643 Converts HC4645-3 to HC4658-3
HA4642 Converts HC4645-3 to HC4648-3
Figure 3-10.
3-6
EN
Made with FlippingBook - Online Brochure Maker