WARNING! Operational interference of the steering cylinder/cylinder fittings and jackplates/transom/splashwell can occur under certain conditions. Check installation thoroughly throughout the full range of motor tilt, jackplate height and trim before making final installation. If interference is not eliminated total steering loss can occur, causing property damage and/or personal injury. For specific trim limit options consult your engine manufacturer.
Figure 3-19.
Dimensions — all front mount cylinders
3/8" COMPRESSION FITTING FOR HOSE CONNECTION
BLEED NIPPLE
2-5/8" (67 mm)
4-7/8" (124 mm)
PIVOT PLATE
21-3/4 (552 mm"
Figure 3-20.
NOTICE! Pivot plate dimensions vary depending on exact cylinder model.
3-18
EN
Made with FlippingBook - Online Brochure Maker