NOTICE! Depending on engine, the cylinder may be mounted different than that shown below. See application chart page 3-21.
Figure 3-27. Triple engine – triple cylinder configuration.
CAUTION! Before connecting the tie bars refer to Section 3.5 of book 48 “Tie bar adjustment and Installation”.
3.5.3 Dimensions — Tournament series cylinder
Max. tilt angle shown – 67°. Typical transom thickness shown, but may vary.
2-3/4"
(70 mm)
5-3/4" (146 mm)
5-1/4" 134 mm
BLEED NIPPLE
3-5/8" 92 mm
22-7/8" (581 mm)
3/8" COMPRESSION FITTING FOR HOSE CONNECTION
Figure 3-28. Tournament cylinder dimensions.
WARNING! Operational interference of the steering cylinder/cylinder fittings and jackplates/transom/splashwell can occur under certain conditions. Check installation thoroughly throughout the full range of motor tilt, jack height and trim before making final installation. If interference is not eliminated total steering loss can occur, causing property damage and/or personal injury.
3-24
EN
Made with FlippingBook - Online Brochure Maker