3.7 SeaStar side mount series Part # HC5370-3
Features • Alternative to front mount cylinder. • Unbalanced cylinder with 4.8/5.7 turns lock to lock (1.7 helm). • Suitable for installation in shallow splashwells.
NOTICE! For Outboard engine use only.
Applications • All engines with threaded tilt (steering) tubes complying with ABYC P17/ ABYC P21/NMEA/BIA standards for mechanical steering. • Cylinder attaches to the engine tilt tube as per ABYC/NMEA/BIA standard. • Single and multiple outboard engine installations. • Total power to 600HP in twin counter rotating application. • Typical applications include center console fishboats and cruisers. • Ease of installation. How to select a side mount outboard steering system 1. From the order guide on page 3-27 select the system configuration based on; a) the number of engines, and b) the total power of engine(s) to be installed. 2. From the order guide select the cylinder(s) & tie bar kits required. 3. From the order guide select the appropriate helms and accessory hardware for each steering station. 4. From the order guide select the fitting and hose kits required for the installation. 5. Confirm that there is sufficient space available in the splashwell and dash areas for the steering components.
WARNING! Not for use with SeaStar PRO helm pumps.
Figure 3-30. HC5370-3 cylinder shown.
3-26
EN
Made with FlippingBook - Online Brochure Maker