NOTICE! Not recommended for use in installations where; a) chopper, cleaver, or surface piercing propellers are used, b) the engine is highly elevated on the transom, c) engine trim tabs have been removed, d) the boat speed exceeds 75mph (120km/h), or e) the power exceeds maximum Coast Guard or M.O.T. recommendations for the boat.
3.7.1 Order guide
ENGINE/CYLINDER CONFIGURATION
DESCRIPTION QTY REQ.
MODEL
PART #
REF. SECTION
SINGLE ENGINE (Single Cylinder) Applications up to 300 HP max. Number of turns 4.8/5.7
Cylinder Helm Hose kit Steering fluid
1 1 1 3
Side mount SeaStar * Outboard hose SeaStar fluid
HC5370-3 HH5271-3
Section 8 Section 10 Section 9
HO51XX HA5430
For extra steering stations add Helm Fitting kit Hose kit Steering fluid 1 1 1 1
SeaStar * Add a station Outboard hose SeaStar fluid
HH5271-3 HF6007 HO51XX HA5430
Section 8 Section 10 Section 10 Section 10
Optional equipment
Back plate kit (for standard helms) 20° wedge (for standard helms) Autopilot fitting kit (for all -3 helms)
HA5418 HA5419 HF6007 PA1200-2
Section 8 Section 8 Section 10 Section 6
Power assist steering
*All non-pro helm designs can be used, see Section 8 for options.
Revision Date: FEBRUARY 8th 2022
3.7.2 General dimensions
Dimensions — tie bar HO5009 for side mount cylinder
ENGINE CENTRE DISTANCE Maximum: 36” (914 mm) Minimum: 26” (660 mm)
3/8” DIA. HOLE
ENGINE CENTRE DISTANCE
Figure 3-31. Tie bar part # HO5009.
3-27
EN
Made with FlippingBook - Online Brochure Maker