3.8 SeaStar splashwell mount series Part # HC5380-3
Features • Light duty alternative to front & side mount cylinders. • Unbalanced cylinder with 5.5/6.5 turns lock to lock. • Fits engines with/without support (steering) tube. Applications • Single and multiple engine capability. • Total power to 600HP in twin counter rotating applications (see order guide). • Transom mounted cylinder. • Speeds to 60mph maximum (97km/h).
How to select a side mount outboard steering system 1. From the order guide on page 3-30 select the system configuration based on; a) the number of engines, and b) the total power of engine(s) to be installed. 2. Select the cylinder and tie bar kit required. 3. From the order guide select the appropriate helms and accessory hardware for each steering station. 4. From the order guide select the fitting and hose kits required. You will have to determine the configuration, length, number of hose and fitting kits required for the installation (refer to page 3-30). 5. Confirm that there is sufficient space available in the splashwell and dash areas for the steering components.
WARNING! Not for use with SeaStar PRO helm pumps.
Figure 3-33. HC5380-3 cylinder shown.
3-29
EN
Made with FlippingBook - Online Brochure Maker