3.9.1 Measuring cable length
HO6116/HO6118
25 X = Tilt Tube to Tilt Tube (Inches) 30 35
15
20
40
45
Jackplate vertical travel
Add to ‘X’ dimension
1
10” — 12”
X + 3” X + 4” X + 5” X + 6”
5
13”
14” — 15” 16” — 20”
10
15
X
Y
20
25
30
1. For a Kicker installed on a motor bracket, add additional length to X dimension. 2. For Main engine installed on a motor bracket add an additional 2” to X dimension. 3. Kicker cable tie bar systems require a minimum clearance of 14” from the end of the tilt tube towards the motor side well gunnel.
MOTOR BRACKET VERTICAL TRAVEL
Figure 3-37.
CAUTION! Do not install on applications that are outside of the cable ranges. Doing so may lead to irreparable damage to the kicker cable tie bar.
Length of cable in inches
Julian date code
LINK ARM ASSEMBLY KIT PART# HP6157
KICKER CABLE KIT PART# HP62xx
DRIVE PLATE KIT PART# HP6156 Use drive plate part# HP6159 for HC5445-3 cylinders
KIT# HP6158 SUPPORT ROD AND NUT
Figure 3-38.
3-33
EN
Made with FlippingBook - Online Brochure Maker