5.1.3 Order guide
SYSTEM CONFIGURATION
DESCRIPTION QTY REQ.
MODEL
PART #
REF. SECTION
Cylinder Helm
1 1
See application guide SeaStar (see note 1) * SeaStar (see note 2) ** SeaStar fluid
SINGLE & DUAL STERNDRIVE For dual sterndrive applications use engine manufactures supplied tie bar.
HH5271-3 HH5272-3 HA5430
Section 8 Section 8 Section 9 Section 10
Steering fluid Tube/hose
3
For extra steering stations add Helm 1
SeaStar (see note 1) * SeaStar (see note 2) ** Add a station – for use with SeaStar Steering hose – for use with SeaStar Steering tube/copper SeaStar fluid
HH5271-3 HH5272-3
Section 8 Section 8
Fitting kit
1
HF6007
Section 10
HF6010
Section 10 Section 9
Steering fluid
1
Optional equipment
Back plate kit (for standard helms) 20° wedge (for standard helms)
HA5418 HA5419
Section 8 Section 8
Autopilot fitting kit – for use with SeaStar hose
HF6007 HF6010 PA1200-2
Section 10 Section 10 Section 6
– for use with SeaStar tube/copper
Power assist steering
*All non-pro helm designs can be used, see Section 6 for options.
Revision Date: FEBRUARY 9th 2022
1. SeaStar helms are the standard recommendation for both non-power and power steered applications. 2. SeaStar helms with a higher displacement can be specified for less wheel turns where faster response is desired. Consult the chart on page 8-17 for options. 3. For dual stern drives – use the tie bar supplied by the engine manufacturer. NOTICE! These recommendations apply to factory stock stern drives only. Modified installations and high performance applications may require a higher capacity steering system. If in doubt, contact Dometic technical service for assistance.
5-2
EN
Made with FlippingBook - Online Brochure Maker