5.1.4 General dimensions WARNING!
Do not attempt to install NPT pipe fittings into the cylinder hose fitting ports on any -3 model cylinder. Doing so will lead to irreparable damage to the cylinder. Only use ORB hose fittings provided by Dometic.
HC5332 BA135-6.88EM
12.08" (306.86 mm)
TRANSOM SHIELD
8.85" (224.79 mm)
12.5" (317.5 mm)
0.25" (6.35 mm)
5" (127 mm) REQUIRED FOR UNRESTRICTED MOUNTING
0.625" (15.88 mm)
1.625" (41.28 mm)
Figure 5-3.
NOTICE! If engine outdrive is not equipped with a torque tab on underside of lower leg, one must be installed to reduce prop torque. CAUTION! Due to cylinder body movement during steering, this cylinder requires use of SeaStar hose (HO51xx), see Section 10 for details.
HC5386-3 (150-7EM)
TRANSOM MOUNT (PROVIDED BY ENGINE MANUFACTURER)
13.95" (355 mm)
2 X TRUNNION PIN (PROVIDED BY ENGINE MANUFACTURER)
Figure 5-4.
5-4
EN
Made with FlippingBook - Online Brochure Maker