1.3 Safety considerations for installers
Before installation • Read this selection guide and understand any other manual(s) supplied with the system. • Ensure you have all the required components on hand before you start. • Do not use a wheel-mounted trim switch with coiled cord. The cord can wrap around the steering wheel shaft and inhibit steering. During installation • Install components as instructed in the installation manual. Some component parts and kits may contain additional installation instructions – refer also to those instructions. • Do not substitute any component of the system without written authorization from Dometic. Dometic parts are rigorously engineered and tested to ensure system integrity. Substitution of components may compromise safety, performance, and reliability. • All steering components, inc. cylinder must be compatible with, and rated for, the engine(s) installed on the boat. • If an instruction is unclear, contradictory, or you are otherwise unsure how to proceed, do not guess. Contact Dometic Marine technical support at Tel: 1-800-730-4082 or email: marinetech@dometic.com. After installation • Perform the system inspection checks described in the installation manual. • Correct any interference issues before handing the boat to the owner. WARNING! Failure to comply with Dometic instructions may result in loss of steering control, which could lead to a collision and/or ejection from the boat, causing property damage, personal injury, and/or death. CAUTION! We recommend that the installation of any Dometic steering component(s) is performed by a certified marine technician.
1-3
EN
Made with FlippingBook - Online Brochure Maker