Features • Autopilot ready – a single installation (i.e. no need to break into system for install of pump) • Converts manual hydraulic steering to power steering • Dramatic reduction in steering wheel torque
• Easy installation • OEM or Retrofit • Simple add on to an existing SeaStar manual system • Use all 1.4 – 2.4 regular SeaStar helm pumps • Compatible with power purge system • Ignition protected (SAE J-1171) • ABYC, CE, NMMA, ISO 10592 Approved • Replaces other 12 & 24 volt systems
6.2.1
Order guide SeaStar P/A unit complete with pilot pump
DESCRIPTION
PART #
Standard SPA Plus type 1 12V pump Standard SPA Plus type 2 12V pump Standard SPA Plus type 1 24V pump Standard SPA Plus type 2 24V pump
PA6010 PA6020 PA7010 PA7020
Table 6-2. Note: Voltage refers to pilot pump only.
6.2.2
Specifications
Voltage Fittings
12 or 24 Volts
Compatible with standard SeaStar hoses (HO51XX, HO57XX, etc.)
Wire length Wire gauge Connector
15 feet 10 awg
3/8” ring
Oil compatibility
SeaStar steering fluid
Weight
4.9 lbs (2.2 Kg)
Autopilot pump sizes
Type 1: 60 in 3 /min (no-load) Type 2: 100 in 3 /min (no-load)
Maximum pressure
1000 psi
Typical current draw (depending on application) 12V Type 1: 4 — 8 amps 12V Type 2: 5 — 11 amps 24V Type 1: 2 — 4 amps 24V Type 2: 3 — 6 amps Autopilot pump cylinder capacity Type 1: 4.9 in 3 — 12.5 in 3 Type 2: 12.5 in 3 — 21.0 in 3 Table 6-3.
6-6
EN
Made with FlippingBook - Online Brochure Maker