7.2.6 Parts included in kit
WARNING! Use the engine manufacturer’s recommend fasteners to mount the engine to the Mega Jackplate. WARNING! If the outboard engine manufacturer has supplied installation instructions, those guidelines must be followed during installation. WARNING! Check the outboard engine manufacturer’s instructions carefully for specifications regarding connection hardware. Ensure the outboard engine manufacturer’s requirements are followed. NOTICE! The use of a transom stiffener for the top bolts on the transom side of the jackplate-to-transom connection is recommended. NOTICE! Refer to ABYC TH-12 standard “Transom crushing at bolt location” for guidelines on mounting the Jackplate to the transom.
The following parts are included with your Mega Jackplate product. If any of these components are missing, contact your dealer or Dometic.
2. Relay Wiring Harness
1. SeaStar Mega jackplate
3. Spade Terminals (Female)
4. Rocker Switch
5. Gauge Kit
Figure 7-9. Included parts.
7-10
EN
Made with FlippingBook - Online Brochure Maker