7.3.2
B-Mode # JC4010 This mode is designed to get the boat quickly up to speed by quickly getting the jackplate and engine trim to the pre-memorized setting set by the user. • Two memory presets: Memorize your favorite Jackplate or engine trim positions by holding the switch up or down for more than 5 seconds. • Two memory recall: Quickly transition to your memorized position by holding the Jackplate or engine trim switch up or down for 1–5 seconds. • Bump mode: Tap the Jackplate or engine trim switch up or down and the plate will move in 1/4” increments while engine trim moves in 1/20 of trim range increments. • Bump memory: Sequential taps on the switch will be memorized for a continuous jackplate or engine trim movement.
7.3.3
Mounting dimensions
.25"
6.125"
UP
4.5"
6.625"
Figure 7-11.
NOTE Mounting dimensions diagram not to scale. For reference only.
7.3.4
System schematic An example of a single jackplate and trim system schematic is shown on page 7-13. Other options available.
7-12
EN
Made with FlippingBook - Online Brochure Maker