Commercial helms — part # HH5217-3, HH5218-3, HH5224-3, HH5225-3 Specifically designed to be used on smaller fishing vessels involved in the lobster and crabbing Industries. The commercial helm pumps are designed with a stainless steel shaft and heavy duty shaft seal and wiper. This new shaft and seal help protect the helm pump from the abrasive effects of sediment that is brought on board by the operator handling traps or pots.
NOTE For commercial use.
STAINLESS STEEL SHAFT
HEAVY DUTY SHAFT SEAL AND WIPER
Figure 8-2.
8.1.2 Accessories
Backplate kit — part # HA5418 a) Used to retrofit a new SeaStar standard helm in the old 4.5” (115 mm) diameter hole, or b) reduce the helm protrusion from the dash by the thickness of the dash, or c) retrofit new SeaStar standard helm into hole cutouts for mechanical and hydraulic steering as per chart.
STEERING WHEEL
NUT
WOODRUFF KEY
FILLER PLUG (VENTED OR NON-VENTED)
BACK PLATE
CARRIAGE BOLTS
PLASTIC BEZEL
WASHER
HELM PUMP
LOCKNUT
Figure 8-3.
8-3
EN
Made with FlippingBook - Online Brochure Maker