20° Wedge – part # HA5419 This kit is designed to mount the helm at a 20° angle to the mounting surface. 4 possible mounting configurations are available.
NOTICE! Not for use with BayStar helm pumps.
DASH
DASH
DASH
DRAIN KIT Installed by customer.
DASH
Figure 8-7.
8.1.3
Order guide — SeaStar helms CAUTION!
-3 helm pumps are fitted with positionable O-ring style hose fitting ports (commonly referred to as ORB). Do not attempt to install an NPT pipe fitting into a -3 helm hose fitting ports. Doing so will lead to irreparable damage to the helm. Only use Dometic O-ring style hose fittings (ORB).
HELM TYPE
PART # DESCRIPTION
DISPLACEMENT cu.in./rev (cc/rev)
RELIEF VALVE SETTING PSI (Bar)
NOTES
HH5269-3 HH5271-3 HH5217-3 HH5273-3 HH5272-3 HH5224-3 HH5285-3 HH6193-3 HH6493-3 HH6544-3 HH6541-3 HH6191-3 HH6491-3 HH6543-3 HH6145-3 HH6445-3 HH6345-3 HH6542-3 HH6192-3 HH6492-3 HH5260-3 HH5279-3 HH5261-3 HH5281-3 HH5263-3 HH5262-3 HH5265-3
Front mount Front mount Front mount (commercial) Front mount Front mount Front mount (commercial) Front mount
1.4 (23.0 1.7 (27.8) 1.7 (27.8) 2.0 (33.0) 2.4 (39.3) 2.4 (39.3) 3.0 (49.1) 1.4 (23.0) 1.4 (23.0) 1.4 (23.0) 1.7 (27.8) 1.7 (27.8) 1.7 (27.8) 2.0 (33.0) 2.0 (33.0) 2.0 (33.0) 2.0 (33.0) 2.4 (39.3) 2.4 (39.3) 2.4 (39.3) 1.4 (23.0) 1.4 (23.0) 1.7 (27.8) 1.7 (27.8) 2.0 (33.0) 2.4 (39.3) 3.0 (49.1)
1000 (70) 1000 (70) 1000 (70) 1000 (70) 1000 (70) 1000 (70) 1000 (70) 1000 (70) 1000 (70) 1000 (70) 1000 (70) 1000 (70) 1000 (70) 1000 (70) 1000 (70) 1000 (70) 1000 (70) 1000 (70) 1000 (70) 1000 (70) 1000 (70) 1000 (70) 1000 (70) 1000 (70) 1000 (70) 1000 (70) 1000 (70)
SEASTAR FRONT MOUNT
2
2
Sport tilt Sport Plus Classic tilt Classic tilt Sport tilt
SEASTAR TILT Note: All sport tilt helms are shipped with the remote filler tube.
Replaces HH5744 Replaces HH5741 Replaces HH5291
Sport
Sport Plus Classic tilt Sport tilt Sport Plus Sport Plus (spline shaft) Classic tilt Sport tilt Sport Plus
Replaces HH5743 Replaces HH5745
Classic
Replaces HH5742 Replaces HH5292
Sport Plus
Rear mount Rear mount (1” straight shaft) Rear mount Rear mount (1” tapered shaft)
SEASTAR REAR MOUNT Note: All rear mount helms are shipped with the remote filler tube
6” shaft
6” shaft
Rear mount Rear mount Rear mount
1. SeaStar PRO helms cannot be used with an unbalanced cylinder. SeaStar reinforced Kevlar outboard style hoses should be used with all SeaStar PRO helms.
2. Commercial helms use a stainless steel shaft and a better sealing top plate for use in extreme conditions and or commercial type applications.
Revision Date: FEBRUARY 25th 2022
8-5
EN
Made with FlippingBook - Online Brochure Maker