HEATING SYSTEMS
Altecnic Robokit Extra®.
EXTRA PROTECTION WITH A SAFETY RELIEF VALVE Safety relief valves are typically used for controlling pressure on boilers in heating systems, on stored hot water cylinders in domestic hot water systems, and in water systems in general. When the calibrated pressure is reached, the valve opens and, through discharge in the atmosphere, prevents the pressure of the system from reaching dangerous levels for the boiler and the components. By doing this, the safety of a system is maintained, and it can continue working efficiently.
of a sealed system, they are not to be connected permanently to a boiler. After the system has been filled and pressurised, the service valves must be closed, the system isolated and the flexible hose removed and stored until it is used again. The Altecnic ALT-ST0035 filling loop consists of a double-check valve, a flexible hose with union connectors, sealing washers, and a ball isolating valve with 4 bar pressure gauge. This can be pre-installed into the isolation valve, meaning that when isolated from the flexi loop and double-check valve attached to the mains, it is exposed to the system pressure in the heating circuit. With this in mind, the ALT-ST0035 has been designed to be installed with easy access without the need to disturb the boiler. This means that homeowners or engineers can read the system pressure, check for pressure drops, and, if needed, top up the system quickly.
installer, Altecnic have developed the Quattro, a neat and simple four-way connector. It facilitates the connection of the water inlet, safety valve, pressure vessel, and the system, and it is the only four-way connection that allows for either left or right installation on the system. The Quattro is featured in the Altecnic Robokit Extra®. Finally, a mounting bracket enables installers to fit the sealed system with ease, ensuring that the expansion vessel is not left unsupported on the pipework. By providing the most high-quality products in a single kit, Altecnic aim to make converting open vent systems to a sealed system easy.
ADDITIONAL COMPONENTS To improve the experience for an
“Altecnic make converting from an open vented to a sealed system of any size easy by packaging all the key components into a handy Robokit Extra®.”
For more information, contact Chris Reilly, Country Manager for Ireland, on +353 (0)85 215 2288 or e-mail chris.reilly@altecnic.co.uk or Gary Swann, Northern Ireland Sales Manager on +44 (0)7760 596727 or e-mail gary.swann@altecnic.co.uk or visit the website at www.altecnic.co.uk
FOLLOW US ON:
www.plumbingmag.com
PLUMBING & HEATING MAGAZINE | 89
Made with FlippingBook - professional solution for displaying marketing and sales documents online