STEERING MECHANICAL STEERING / STEERING HELMS
HELM VISUAL IDENTIFICATION GUIDE THIS IS AN OVERVIEW OF DOMETIC RACK AND PINION STEERING HELMS LIKELY TO BE ENCOUNTERED.
The Rack™ & HPS Rack™ (“Back Mount” Rack) Note: Rack steering requires 2 1/4” hole in the dash.
• Four bolts and washers secure cable’s rack housing to helm. • Helm/cable install as unit from back of dash. • Helm requires current generation rack cables (will not bolt up to older style cables). • Dual cable has one rack housing with two cables attached. Single helm works on both single and dual cable applications • NFB recommended for non-hydraulic power-assist outboards. • One bezel is offered; angle to dash is changed by adding wedges. See below:
Kit: SS141XX (Rack Single Cable);
SH5210P
HPS Rack is sold as components only.
NFB™ Rack & NFB™ Pro Rack™ (“Back Mount” Rack) • Four bolts and washers secure cable’s rack housing to helm. • Helm has No FeedBack™ feature. • Helm/cable install as unit from back of dash. • Helm requires current generation rack cables (will not bolt up to older style cables). • Dual cable has one rack housing with two cables attached. Single helm works on both single and dual cable applications. • One bezel is offered; angle to dash is changed by adding wedges. See below:
Kits: SS151XX (NFB Rack Single Cable), SS152XX (NFB Pro Rack Dual Cable).
SH5230P
Rack Wedge Kits
SB39526P (90° Bezel) The Rack, HPS Rack
SB39544P (90° Bezel) NFB Rack, NFB Pro Rack
SB27449P (20° Wedge Kit) The Rack, HPS Rack, NFB Rack & NFB Pro Rack
24 — DOMETIC.COM
Made with FlippingBook - PDF hosting