STEERING MECHANICAL STEERING / STEERING KITS / INBOARD, STERNDRIVE & SMALL OUTBOARD THE RACK MECHANICAL RACK STEERING SYSTEM System Overview:
Traditional Dometic mechanical steering is still the choice for sterndrives, inboards and other power assisted applications. It’s just right for power steered boats in which No FeedBack™ systems are not required. Our Rack Steering features the precision and comfort of four turns lock-to-lock with a cable and helm that install easily from behind the dash. In single cable configurations, this is the best 4-turn choice for power-steered boats. APPLICATIONS: Virtually all power assisted sterndrive boats with wheels up to 16” diameter. Dometic’s Back Mount Rack Replaces 1984-1996 “The Rack” steering without dash modification. (Requires use of SSC134XX Back Mount Rack cable.) For single station use only. Components are available for dual cable systems, but we recommend No FeedBack steering for all dual cable steered, non-hydraulic-power assisted outboards and sterndrives. See the NFB Pro Rack Dual Cable and SeaStar PRO hydraulic steering section of this catalog.
COMPLETE SYSTEM BM Rack Steering Kit (single cable) COMPONENTS Back Mount Rack Helm (single/dual)
SS141XX
SH5210P
Back Mount Rack Single Cable
SSC134XX
SB39526P
Back Mount Bezel (90°)
OPTIONS
BM Rack Tilt Dash Module Each Kit Includes Tilt Helm & Tilt Mechanism
SHT91610
FEATURES: • Precise, easy 4 turns lock-to-lock. • Kits include: cable, helm, 90° bezel and hardware. • Standard 3/4” round tapered steering shaft. • Stainless steel cable output ends.
BM Rack Tilt Helm (single/dual)
SH91610P *
Sport Tilt Mechanism
SH91800P
Sport Plus Tilt Mechanism
SH91900P
• F ast, easy installation: back mount design allows quick placement in dash PLUS mounting hardware fits industry-standard Dometic rack holes. • Meets A.B.Y.C. standards.
SSCX154XX
Xtreme™ Rack Single Cable
Dash Wedge Kit (10°)
SB27448P
Dash Wedge Kit (20°)
SB27449P
• Meets N.M.M.A. certification requirements. • Made, designed and assembled in the USA.
Cable Gard (fits most tilt tubes)
SA39329P
SERVICE ITEMS
Back Mount Rack Dual Cable
SSC135XX †
DISCLAIMER: This system is only recommended as replacement for the original system as installed by the boat manufacturer. Dometic always recommends NFB helms for outboard applications. NFB helms lock out steering loads caused by propeller torque eliminating the driver fatigue normally experienced with a standard helm. Patented Dometic steering helms are a drop in replacement for standard rack system.
Steering Wheel Hardware Kit (Old #2745417P)
SA27454P
* Requires tilt mechanism to complete Tilt Steering system installation. † For dual rack & pinion steered boats. If steering is NOT power-assisted, upgrading to NFB 4.0 Pro Rack is recommended.
36 — DOMETIC.COM
Made with FlippingBook - PDF hosting