STEERING HYDRAULIC STEERING / HELMS
HYDRAULIC HELM MOUNTING OPTIONS SeaStar offers a variety of helm mounting options to accomodate nearly any preference. These options are available for all helms, except Capilano and Hynautic helms. Please take a moment to familiarize yourself with these options before ordering replacement steering systems or components.
SeaStar hydraulic steering helms typically mount on the dash surface with the steering shaft at 90° to the dash. A SeaStar rear mount helm is also available for concealed (behind the dash) mounting. Capilano and Hynautic helms are available in only one mounting style: behind the dash at 90°.
Optional kits are available to reduce SeaStar helm protrusion from the dash, or to cover dash holes left by previously installed steering systems.
The Round Bezel Kit (HA5478) reduces SeaStar helm protrusion from the front of the dash by 3.75”. (Not for BayStar.)
The Backplate Kit (HA5418) reduces SeaStar helm protrusion from the front by the thickness of the dash and allows clean retrofit of SeaStar helm where following helms were previously installed: pre-1991 SeaStar, SyTen, H-50 and H-80, or mechanical rotary steering. (Not for BayStar.)
The 20° Dash Mounting Wedge Kit (HA5419) allows a SeaStar helm to be mounted 20° from perpendicular in any or four configurations. (Not for BayStar.)
SeaStar Front Mount Helm (mounts on front of dash)
SeaStar Rear Mount Helm (mounts behind dash)
SeaStar Helm Mounting Kits: HA5478 Round Bezel Kit
HA5418 Back Plate Kit
HA5419 20° Dash Wedge Kit
NOT FOR USE WITH BAYSTAR HELMS
50 — DOMETIC.COM
Made with FlippingBook - PDF hosting