STEERING HYDRAULIC STEERING / STEERING KITS / OUTBOARD
SEASTAR OUTBOARD STEERING SYSTEM (SPLASHWELL MOUNT)
System Overview: A Very Economical Hydraulic Steering Alternative, SeaStar splashwell mount steering is ideal for engines which do not have threaded engine tilt tubes (cannot use front or side mount cylinders). The splashwell mount cylinder typically attaches to an anchor point on or near the inside of the boat’s transom.
Applications: An ideal hydraulic steering solution for engines without tilt tubes.
Single and dual non-power-assisted outboard engines up to 300 HP (600 combined HP for counter-rotating duals).
Suitable for speeds up to 60 MPH and dual station use (with purchase of extra helm, hose & fittings). Dual engines require purchase of a tie bar kit and extra hardware. Not suitable for engines fitted with factory power steering. Features: • Ideal for outboard engines which do not have a tilt tube. • Design allows wide variety of mountings. • Light duty alternative to front mount cylinder where space allows. • Suitable for installation in shallow splashwells. • 5.5/6.5 turns lock-to-lock using SeaStar 1.7 helm (unbalanced cylinder). • Compact helm has only a 4-7/16” footprint — needs only 3” dash hole (Tilt requires larger hole). • Standard 3/4” tapered steering shaft. • HC5380-3 features a compact 9” stroke for tight applications. • Meets A.B.Y.C. standards. • Meets N.M.M.A. certification requirements.
(Splashwell Mount)
COMPLETE SYSTEMS System components sold separately. See application and ordering guides to select appropriate components. Components SeaStar 1.7 Helm HH5271-3 Splashwell Mount Outboard Cylinder HC5380-3 Hose Kit (2 hoses) HO51xx SeaStar Oil (1 Quart) HA5430 Options SeaStar 1.7 - Front Mount Commercial Helm HH5217-3** SeaStar 1.7 - Rear Mount Helm HH5261-3 SeaStar 1.7 - Sport Tilt Helm HH6191-3 SeaStar 1.7 - Classic Tilt Helm HH6541-3 Power Assist, 15’ Harness PA1200-2 SeaStar Round Bezel Kit HA5478 SeaStar Backplate Kit HA5418 SeaStar 20° Dash Wedge Kit HA5419 SeaStar Bulkhead Hose Kit (2 hoses) HO81xx SeaStar Twin Engine Tie Bar Kit HO5010 Add-A-Station/Autopilot Fitting Kit HF6007
UPGRADE WITH SEASTAR POWER ASSIST
Service Items Cylinder seal kit
N/A
Cylinder tee/bleeder hose fitting
HF6002
**Stainless steel shaft/robust shaft seal area
WE RECOMMEND The use of SeaStar Steering Fluid ONLY in our hydraulic steering systems. See page 84.
64 — DOMETIC.COM
Made with FlippingBook - PDF hosting