SEASTAR STERNDRIVE STEERING
System Overview: SeaStar Sterndrive Steering is the best choice for non-power assisted sterndrives. The system is based upon the SeaStar helm family, which allows for dual station and autopilot use. Cylinders are specific to drive brands and models. Applications: Ideal for most sterndrives, especially non-power-assisted units, SeaStar is suitable for single and multiple drives and dual stations. Features: • Best and Most Economical autopilot interface for sterndrives! Easy installation. • Simple multiple steering station connection. • Optional SeaStar 2.0 & 2.4 helms for quicker steering response. • Standard 3/4” tapered steering shaft. • Fast, easy installation. • Meets A.B.Y.C. standards. • Meets N.M.M.A. certification requirements. SeaStar Autopilot Interface SeaStar is the best steering choice to interface with most autopilots. If you are installing an autopilot on a mechanically steered boat, we recommend you upgrade to SeaStar for performance reasons. If you’re upgrading to SeaStar, plan ahead: future installation of an autopilot or extra steering station can be simplified by installing two pairs of shorter hose kits. Connect them with union coupling fittings, part no. HF5527. Tee fittings can be installed with ease at a later date. Bulkhead union fitting kits are available to facilitate hose runs through transoms and splashwells:
COMPLETE SYSTEMS System components sold separately. See application and ordering guides to select appropriate components. Components SeaStar 1.7 - Front Mount Helm HH5271-3 Sterndrive Cylinder Cylinder part numbers vary, see application chart HC53xx-3 Hose Kit (2 hoses) HO51xx SeaStar Oil (2 Quarts) HA5430
Options SeaStar 1.7 - Front Mt. Commercial Helm
HH5217-3
SeaStar 1.7 - Rear Mount Helm
HH5261-3
SeaStar 1.7 - Sport Tilt Helm
HH6191-3
SeaStar 1.7 - Classic Tilt Helm
HH6541-3
SeaStar 2.0 - Front Mount Helm
HH5273-3
SeaStar 2.4 - Front Mount Helm
HH5272-3
HF5512 up to 3/4" (19mm) splashwell, 1 cylinder HF5513 up to 3" (76mm) transom, 1 cylinder HF5514 up to 3/4" (19mm) splashwell, 2 cylinders HF5515 up to 3" (76mm) transom, 2 cylinders
SeaStar 2.4 - Front Mt. Commercial Helm
HH5224-3
SeaStar 2.4 - Rear Mount Helm
HH5262-3
SeaStar 2.4 - Sport Tilt Helm
HH6192-3
For an autopilot installation, a third (compensating) line must be installed and identified. (SeaStar helm ports marked “R” are for connection of additional helm and/or autopilot compensating lines.) Use HF6007 (outboards) or HF5502 (sterndrives and inboards) fitting kits when adding an autopilot to your SeaStar system.
SeaStar 2.4 - Classic Tilt Helm
HH6542-3
SeaStar Round Bezel Kit
HA5478
SeaStar Backplate Kit
HA5418
SeaStar 20° Dash Wedge Kit
HA5419
SeaStar Bulkhead Hose Kit (2 hoses)
HO81_ _
WE RECOMMEND The use of SeaStar Steering Fluid ONLY in our hydraulic steering systems. See page 84.
Add-A-Station Kit (Nylon/Copper Tube)
HF6010
Add-A-Station Kit (Hose)
HF6007
3/8” Tubing (see ordering guide)
HT5xxx
Service Items SeaStar Oil (1 Qt.)
HA5430
Helm Service Kit
HP6032
MOBILE LIVING MADE EASY — 67
Made with FlippingBook - PDF hosting