WHY USE POWER ASSIST STEERING? System Overview: The SeaStar Power Assist unit can be installed on new SeaStar steering installations or as an easy retro-fit to existing systems.
Suitable for most boat types, the SeaStar Power Assist uses an electronically controlled hydraulic pump to provide on-demand power steering. It is installed into the hydraulic steering circuit between the helm and steering cylinder. The Power Assist unit is powered from the boat’s battery and adjusts automatically to the input voltage (12V or 24V).
The SeaStar Power Assist can be used on boats with multiple engines and rudders, multiple steering stations and autopilots.
If power to the unit is interrupted for any reason, the steering system will automatically return to manual operation without any change to the number of lock-to-lock turns. In this case, the steering will of course be heavier than with the Power Assist activated. SEASTAR POWER ASSIST PRO Specifically designed for high torque single engine outboard applications fitted with SeaStar Pro helms, such as performance bass boats.
Features: • Dramatically reduces steering effort • Wall or Floor mount • Easy to install • Simple add-on to an existing SeaStar Steering system (From 1.4 to 2.4 SeaStar Helms) • OEM or retro-fit • Compatible with power purge system
COMPLETE SYSTEMS
Power Assist, 15’ Harness
PA1200-2
Power Assist, 15’ Harness (Dual prop engines and high load applications)
PA1200-2HP
Power Assist, 25’ Harness
PA1225-2
Power Assist Pro, 15’ Harness
PA1315-2
• Return to manual in failure mode • Suitable for use with autopilots • 12V or 24V operation • Wiring harness included • Ignition protected (SAE J1171) • ABYC, CE, NMMA, ISO 10592 Approved
OPTIONS Dual Ignition Control Kit
HA1201
Harness Fuse Kit
HA1206
Replacement Motor
HA1203
WE RECOMMEND The use of SeaStar Steering Fluid ONLY in our hydraulic steering systems. See page 84.
MOBILE LIVING MADE EASY — 75
Made with FlippingBook - PDF hosting