STEERING HYDRAULIC STEERING / HOSE & TUBING
HOSE AND TUBING Overview: SeaStar Steering hoses are a custom multi-layered composite design, engineered specifically for our systems. They are designed to exceed SAE and ABYC specifications and provide precise steering control not achievable with hydraulic industry standard hoses. SeaStar Hoses are engineered to provide the system with very low thermal expansion properties and are kink and abrasion resistant. Our hoses also feature a swaged solid fitting connection with an O-ring seal and a metal to metal backup to the primary seal. Due to performance and safety concerns, Dometic recommends that ONLY SeaStar or SeaStar PRO steering hoses be used in SeaStar Steering Systems.
BayStar Tubing (HT4420H/HT4430H) Can be used with all BayStar helms with appropriate fittings. Kit contains two cut lengths of tubing.
BAYSTAR TUBING KITS
PART NO.
20’ Kit (2 x 20’ lengths tubing)
HT4420H
30’ Kit (2 x 30’ lengths tubing) HT4430H (NOTE: BayStar Cylinders with H suffix must use tubing part number with H suffix.)
* Decrease effort by installing SeaStar HO51xx Outboard hose
BAYSTAR TUBING KIT HT44xxH
SeaStar Outboard Hose Kit (HO51xx*) Includes two hoses - can be used with all SeaStar systems, except SeaStar PRO, Capilano and 3-line inboard systems.
OUTBOARD HOSE KIT HO51xx
SeaStar Pro Outboard Kevlar Hose Kit (HO57xx*) Includes two hoses - can be used with all SeaStar / BayStar Steering Systems.
* SeaStar and SeaStar PRO Hose Kits are available in 2', 3',4',5' and in 2' increments from 6'-30'. 40 foot hose kits are special order only.
OUTBOARD HOSE KIT HO57xx
Nylon Tubing (HT5xxx) Can be used with SeaStar 1.7 helms on stern drives (except with HC5332 cylinder) and small inboards with fitting kit; do not use on outboard systems.
LENGTH x OD
PART NO.
25’ x 3/8”
HT5092
50’ x 3/8”
HT5095
75’ x 38”
HT5097
100’ x 3/8”
HT5100
80 — DOMETIC.COM
Made with FlippingBook - PDF hosting