TREX TRANSCEND® AND TREX ENHANCE® DECKING CARE AND CLEANING GUIDE
PROBLEM
SOLUTION
While this is not common, static electricity can occur on walking surfaces in dry climates or in areas where dry winds and dust-borne particles lay on the decking surfaces. Static electricity can build up on occupants walking across any composite decking surface, including Trex, then produce a small static shock if they touch a grounded metal surface such as railing, door, etc. This condition can be decreased greatly with the use of a product call ACL Staticide®. Two products tested were General Purpose Staticide® and Heavy Duty Staticide®. Both are effective in greatly reducing static electricity on Trex decking surfaces. Apply full strength using a mop on a dry decking surface, and allow to dry; no rinsing or diluting needed. Products are non-toxic, non-flammable, non-staining (will not change the color of decking surface), completely biodegradable and safe to use. Product is water-based and may require a second application after rain or other weather conditions. Over a period of time, the effect of static will dissipate naturally on the decking surface.
Trex and Static Electricity
See link for more information on product: http://www.aclstaticide.com/antistatic_coatings.html
Use caution when using rubber-backed mats (i.e. welcome mats, etc.) as these may contain substances that can sometimes discolor or lighten the decking surface.
Rubber Mats
Store decking on a flat level surface and ALWAYS use proper supports (dunnage). DO NOT store directly on the ground. When stacking Transcend decking as well as all fascia products/bundles, supports (dunnage) should start approximately 254 mm from each end. (Enhance decking should start approximately 457 mm from each end) and be spaced approximately 0.61 m on center. In addition, supports (dunnage) should line up vertically/perpendicular to the decking product. Adjust support blocks (dunnage) accordingly if bundles are loose. For Enhance decking, and 1x12 and 1x8 products, the maximum stack height is 12 bundles. For all other decking products maximum stack height is 14 bundles (IMPORTANT TO NOTE THAT PROPER DUNNAGE SPACING MUST BE IN PLACE FOR THESE HEIGHTS). When stacking multiple bundles, ensure that dunnage lines up vertically down through each stack. ALWAYS cover decking products on site until ready to be installed.
Material Handling / Storage
Strait-Line® is a registered trademark of Irwin Industrial Tool Company. Sakrete™ is a trademark of Oldcastle APG, a CRH Company. ACL Staticide® is a registered trademark of ACL Incorporated. *Use of products containing bleach or acid can lighten the lighten the surface of Trex. Use in an inconspicuous area to determine whether you like the effect. Neither product will affect the structural integrity of Trex. **Use of a pressure washer greater than 214 Bar could damage the boards and void the warranty.
7
Made with FlippingBook - professional solution for displaying marketing and sales documents online