Controls MyTouch Controls
Part number
Price
MyTouch Display
WBCL151002
$470.66
n
WBCL151000
$843.70
Cabin Control Kit A-Series Includes: electrical box with controller card, MyTouch display with Webasto cover plate, display cable 5 m, remote air temperature sensor 3 m, max. switching current: 2 x 3.15 A Ultimate Cabin Control Kit Includes: electrical box with controller card, MyTouch display with Webasto cover plate, display cable 5 m, remote air temperature sensor 3 m, max. switching current: 3.15 A Will be the “Master” unit in a Master-Slave configuration Ultimate Cabin Control Includes: Electrical box with controller card, max. switching current: 3.15 A Shall be configured as “Slave” unit in a Master-Slave configuration Control Box F-Series F500-F2000 Kit includes: Electrical box with controller card, MyTouch display with Webasto cover plate, display cable 5 m
n *
2510197 European Part Number
n *
2510198 European Part Number
n
2510288
$1,460.00
n
Display cable MyTouch 5 m
WBCL151001
$34.10
n
Display cable MyTouch 10 m
WBCL151005
$57.96
n
Can also be used to create the “Master-Slave” network between Ultimate Cabin Control units Coupling for display cable MyTouch Can be used to extend MyTouch display cables
WBCL151006
$32.95
Remote air temperature sensor with 3 m cable
WBCL000813
$58.05
n **
Remote air temperature sensor with 6 m cable
WBCL000810
$75.93
n **
Remote air temperature sensor with 12 m cable
WBCL000812
$84.74
n **
BlueCool CAN-Bus module
WBCL1203091
$362.66
Electronic silencer: to be mounted afterwards for significant reduction of humming noise at low blower speeds suitable for 4.5 to 6,000 BTU / h Electronic silencer: to be mounted afterwards for significant reduction of humming noise at low blower speeds suitable for 9 to 12,000 BTU / h Electronic silencer: to be mounted afterwards for significant reduction of humming noise at low blower speeds suitable for 16 to 24,000 BTU / h
WBCL010160
$919.01
WBCL010161
$960.80
WBCL010162
$1,145.81
Already included in scope of delivery Optional accessory * A-Series air handler may also be connected to chiller control directly. In this case no cabin control kit is needed. ** Required if chiller shall run in automatic mode or if air handlers are connected to the chiller electronics. n Mandatory accessory
162
Made with FlippingBook Online newsletter