Dies
Pneumatic Hemming Die A Permanent Fixture on Your Press Brake
• Remains in closed position until activated to perform the hemming operation • 20° inclination to avoid workpiece fouling the lower beam • Can be set permanently on the lower beam to allow traditional tooling to be used • Hardened and ground solid length hemming tool, eliminates tool joint marking whilst flattening
1V die directly mounted or use any die holder
Specification
Length 1250 mm 2050 mm 2550 mm 3050 mm 4050 mm
Mild Steel: 2.0 mm Stainless Steel: 1.5 mm
Maximum Material Thickness
Allowable Tonnage
100 t/m
Solenoid Valve Power
24V DC
Air Pressure
2 Bar
Air Flow
400 litres/min
Price: POA Images shown without PPE
62
Made with FlippingBook - Online catalogs