GWO SLS v2.0

GWO Slinger Signaller V2.0

2021-04-01_TS_SLS_V2

9 S LINGER S IGNALLER M ODULE

9.1 Aims and objectives

The aim of GWO ’s Slinger Signaller training module is to enable the participant to support and care for themselves and others while working with slinger signalling in the wind industry by possessing the required knowledge, skills and ability to conduct assigned tasks safely and efficiently. Upon successful completion of GWO ’s Slinger Signaller training course, the participant will be able to work within the wind industry conducting slinging techniques and signalling during simple lifting operations, meaning lifts conducted based on a lifting plan or covering known hazards.

Overall learning objectives:

The Slinger Signaller will have the ability to:

On their own, take the responsibility to attach and detach the load to and from the crane lifting attachment (Ability, basic level) Take responsibility to initiate and direct the safe movement of the crane, including multiple slinger signallers during limited or blind lifts in both familiar and unfamiliar situations (Ability, intermediate level)

Take responsibility for their role and responsibilities during the lift (Ability, intermediate level)

On their own, take responsibility for visual pre and post inspection on lifting accessories and load (Ability, intermediate level)

Take responsibility for handling lifting accessories (Ability, basic level)

Can act independently when taking responsibility for ensuring safe lift-off and lay down of the load (Ability, intermediate level) Take responsibility for slinging various types of load, based on weight, centre of gravity, shape and size and to seek guidance when needed (Ability, basic level) Take the responsibility to carry out generic routine lifts in accordance with the lift plan independently and responsibly (Ability, intermediate level) Take the responsibility to comply with instructions/procedures set up by the employer to manage lifting and to seek guidance when needed (Ability, basic level) Take the responsibility to ensure that equipment is properly applied, maintained and that defects are reported (Ability, basic level)

9.2 Duration of the Slinger Signaller module

The total contact time for completing this slinger signaller module is estimated to be 13 hours and 40 minutes. This is based on the time estimate given in the module timetable.

The training provider must not exceed the times per day given in table 9-2 below.

Global Wind Organisation www.globalwindsafety.org

21 / 67

Made with FlippingBook Learn more on our blog