IEEE 841 MOTOR
Frame : 143T–449T Volt : 460V
RPM : 3600/1800/1200 Body : T–Frame
HP : 1–300 Pole : 2/4/6
• TEFC IP 56 Protection • 40°C Ambient Temp. Rating • Inverter Rated - 15:1 Constant Torque MG1 Part 31 • Complete Cast-Iron Construction • 2-Part Epoxy Paint Protection • VPI with Tropicalization on Stator Windings • Dual Oversized Bearings on DE & ODE • Labyrinth Seals Installed on DE & ODE • Felt Wiper on Inner Bearing Retainer • Bearing Grease Chamber Pressure Relief Valve STANDARD FEATURES
224693
• Stainless Steel Hardware • Regreasable Bearings • One-way Brass Condensation Drains • 1.25 Service Factor up to 50HP (1.15 for Larger Frames) • C & D Flanges Available • Meets IEEE 841 Standards / IEEE 45 Marine Duty • Class H Insulation • Drive End Shaft Grounding Brush
• 60 Month Warranty From Date of Shipment • Class 1, Div 2, Groups A, B, C & D Certified
Labyrinth seals on both ends of motor
Class H - Silicone Lead wires with Fiberglass jacket protects leads from abrasion but remain flexible
RRESTOR RC
Internal Shaft Grounding
Sintered brass breathers allow condensation to leave motor but resist water intrustion
Grease pressure reliefs act to battle overgreasing
Continued on back
info@techtopind.com www.techtopind.com
2815 Colonnades Court Peachtree Corners, GA 30071
Tel: 1–855–TECHTOP Fax: 1–866–204–1498
2023
Made with FlippingBook Online newsletter maker