VistaCool ™ 3 Direct-to-Drain Thermal Reduction System for Autoclave Wastewater
ELIMINATES THE NEED FOR AUTOCLAVE CONDENSER BOTTLES by cooling sterilizer wastewater and sending it directly down the drain automatically.
Protects Cabinets Helps prevent mold, mildew, rot and rust caused by spills and humid environments created by exhaust from condenser bottles. Protects Staff Eliminates the need for office staff to empty hot water bottles manually.
Protects Drains Prevents autoclave wastewater from damaging plumbing. Built-in backflow prevention meets or exceeds local plumbing codes. Saves Time Non-electric, self-regulating system saves staff time—there’s no user maintenance required!
Coolant overflow always at 12 o’clock
Acceptible Positions
90º
If installed horizontally, coolant overflow port must be UP in 12 o’clock position Install anywhere. The innovative design of the new VistaCool 3 provides all the same benefits as its predecessors, while occupying less space. The system’s included mounting clips and pressurized drain line enable it to be installed vertically or horizontally in almost any location.
System Specifications
17”
13.75”
15”
3.5”
5.75”
4”
3.5”
10.75”
13”
V7601 - For one autoclave V7502 - For two autoclaves Note: Optional, adjustable tank stands raise the installed height of V7501 & V7502 models between 1/2” and 5” in half-inch increments. Order S7545 for V7501; order S7547 for V7502. Installation Requirements V7501- For one autoclave 1/4” connection to cold water supply: Supply fittings, water supply valve, cold water feed line and CSA-certified VistaCheck™ Dual Check Backflow Preventer(s) are all included! Air gap accessory available separately if required by local code authorities.
Drain connection with trap : Inline thermal sensor(s) included to ensure wastewater is cool enough to send directly down the drain. 1-1/2” utility tee with push-in fittings included with V7501 & V7502 models. Optional DrainHub™ multi-port drain adapter recommended to allow multiple drain connections in one small, space-saving hub assembly.
Recommended Accessories
VistaPure ™ AutoFill Replenish any new or older-model STAT IM and BRAVO autoclave with distilled-quality water automatically, enabling truly hands-free convenience.
VistaPure ™ Water Filtration
DrainHub Multi-Port Drain Adapter This CSA-certified, patent-pending device accepts up to eight drain connections in one small hub—saving space, cost and time!
Provides two grades of high-quality water for autoclaves, dental bottles, ultrasonic cleaners and the rinse cycle of instrument washers. V3000
S3020 - AutoFill for STATIM S3030 - AutoFill for BRAVO
DH154 - Four-port drain adapter DH158 - Eight-port drain adapter
VistaPure ™ , VistaCool ™ and DrainHub ™ are manufactured by: Vista Research Group 1244 County Road 1475, Ashland, OH 44805 USA Tel: (419) 281-3927 VistaResearchGroup.com
Distributed by: SciCan Inc. 701 Technology Dr., Canonsburg, PA 15317, USA Tel: 724-820-1600 Toll Free: 1-800-572-1211 uscustomerservice@scican.com
Distributed by: SciCan Ltd. 1440 Don Mills Rd., Toronto, ON, Canada, M3B 3P9 Tel: 416-445-1600 Toll free: 1-800-667-7733 customerservice@scican.com
www.scican.com
Page 1 Page 2Made with FlippingBook - Online Brochure Maker