4. Placing the Transfer Secure your print on the product and close the press. It starts pressing automatically. 5. Remember you can press STOP if you want to open the press in the process of pressing; it will then open automatically after you press STOP . 6. Instructions Follow the specific instructions for your specific transfer paper and product. 7. Repeating the Routine Continue pressing additional shirts using the same process.
Note: If you don’t want the press to start automatically when you push in the drawer, keep the Batch button off and follow the first steps in the manual only.
3. Save pressing settings
You can save 6 product press settings on the Press. The press will remember it for next time, and you won't have to set it again.
1. Press “ Mode ” on the press. A small 1 will flash. Set the time and temp as you want the press to remember the settings for the first mode.
2. Press mode again, a small number 2 will flash, set the time and temp for the 2 nd mode. Continue doing this for all 6 modes, or as you desire. 1 2 3 4 5 6 A B
Made with FlippingBook - professional solution for displaying marketing and sales documents online