HORIZONTAL & VERTICAL TRANSPORT PLATE CLAMPS
The IP10 vertical lifting clamp is used for the lifting, turning, moving or vertical transfer of sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180°) as needed. Usually used as a single point pick up when used with a spreader beam with multiple vertical drop lines. IP 10 Basic - For vertical lifting, turning & transfer
IPH10E - For horizontal lifting & transfer, with handle
The IPh10E clamps are suitable for the lifting and transfer in horizontal position of non-sagging steel plates. The clamp is equipped with a handle and torsion spring for simple and easy placement onto the plate.
IPU 10 Universal - For lifting in any direction
The IPU10 vertical lifting clamp is used for the lifting, turning, moving or vertical transfer of sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180°) as needed. The hinged hoisting eye allows for the clamp to place and lift he load from any direction, or with a multiple leg sling without side loading the clamp.
The IPH10 clamps are suitable for listing and transfer in horizontal position of non-sagging steel plates. The clamp is equipped with a handle and torsion spring for simple and easy placement onto the plate. The most important addition is the use of magnets which ensures the clamps remain in the proper position on the plate. IPU10 - For horizontal lifting & transfer ,with magnets, torsion spring & handle
98
LIFTING SALES DEPARTMENT
+2711 030 0400 | sales@shutterlock.co.za
Made with FlippingBook - Online magazine maker