HORIZONTAL PLATE CLAMPS
IPHOZ
IPH10E
FOR HORIZONTAL LIFTING AND TRANSFER
• Available in capacities of .75 thru 25 metric tons • Wide variety of jaw openings available: 0 to 120mm • Welded alloy steel body for strength and smaller size. Forged alloy components, where required • Equipped with handle foe easy placement • Individually Proof Tested to 2 times the Working Load Limit with certification • Company name Crosby (IP), logo, Maximum & Minimum Working Load Limit and jaw opening permanently stamped on body • Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty logbook • Maintenance replacement kits are available • Manufactured by a ISO 9001 facility • All sizes are RFID EQUIPPED
The IPH10E/IPH10JE horizontal lifting clamps are for use in the lifting and transfer in horizontal position of non-sagging materials or of bundles of non-sagging materials. These clamps must be used in pairs or more.
The IPHOZ horizontal lifting clamp is to be used for lifting and transferring, in the horizontal position, of thin sheet and other materials that will sag or bend when lifted. These clamps must be used in pairs or more.
MODEL IPH10E: JAW OPENING RANGE 0 to 60mm
DIMENSIONS (mm)
WORKING LOAD LIMIT PER PAIR (t)*
IPH10E STOCK NO.
WEIGHT EACH (kg.)
MODEL
F 109 109 104 123 133 141 164
G 256 266 280 320 330 353 300
H 110 120 130 130 140 150 220
J 20 20 20 20 25 25 32
K 40 48 48 48 62 62 88
JAW A B C E
2703542 2703543 2703544 2703545 2703546 2703547 2705119
2 3 4.5 6 9 12 25
IPH10E IPH10E IPH10E IPH10E IPH10E IPH10E IPHTOZ
0-60 0-60 0-60 0-60 0-60 0-60 0-60
117 117 132 143 157 172 169
16 20 25 25 30 30 40
22 26 30 36 43 47 47
5.5 7.50 10.5 13.0 18.5 21.5 39.0
* Design Factor based on EN 13155 and ASME B30.20.
MODEL IPH10JE: JAW OPENING RANGE 60 to 120mm
DIMENSIONS (mm)
WORKING LOAD LIMIT PER PAIR (t)*
IPH10JE STOCK NO. 2703553 2703554 2703555 2703556 2703557
WEIGHT EACH (kg.)
MODEL
F G H J K
JAW A B C E
L
3 4.5
IPH10JE IPH10JE IPH10JE IPH10JE IPH10JE
266 280 320 330 353
60 - 120 60 - 120 60 - 120 60 - 120 60 - 120
20 25 25 30 30
26 30 36 43 47
177 192 203 217 232
48 48 48 62 62
9.0 12.0 15.0 20.5 24.0
109 104 123 133 141
120 130 130 140 150
20 20 20 25 25
11 12 14 16 17
6 9 12
* Design Factor based on EN 13155 and ASME B30.20.
MODEL IPHOZ: JAW OPENING RANGE 0 to 60mm
DIMENSIONS (mm) JAWAB CE FGHJK
WORKING LOAD LIMIT PER PAIR (t)*
IPHOZ STOCK NO.
WEIGHT EACH (kg.)
MODEL
16 22 26 30
135 166 168 7.20 70 125 125 75
20 25 25 .98 12 16 20 20
119 192 200 220
130 160 190 9.84 81 100 120 120
12 12 10 10
2705405 2705406 2705407 2705408 2705401 2705402 2705403 2705404
0.75 1.5 3 4.5
IPHOZ IPHOZ IPHOZ IPHOZ IPHOZ IPHOZ IPHOZ IPHOZ
0 - 30 0 - 45 0 - 45 0 - 45
94 133 137 138
16 16 20 25
3.0 5.5 8.0 8.5
WITH LARGER JAW OPENING
15.5 20.5 38.9 83.8
0 - 60 0 - 60 0 - 60 0 - 60
171 211 217 8.66
30 30 40 1.57
36 43 47 1.85
235 276 294 12.48
20 20 19 .87
6 9
12 15
* Design Factor based on EN 13155 and ASME B30.20.
LIFTING SALES DEPARTMENT
+2711 030 0400 | sales@shutterlock.co.za
Made with FlippingBook - Online magazine maker