VERTICAL PLATE CLAMPS
IPNM10N
IPNM10P
FOR USE IN ALMOST ALL SECTORS OF INDUSTRY WHERE DURING THE LIFT OR TRANSFER, NO DAMAGE TO THE MATERIAL IS PERMITTED. • Available in capacities of .5, 1 and 2 metric tons • Wide variety of jaw openings available: 0 to 38mm • Welded alloy steel body for strength and smaller size. Forged alloy components, where required • Individually Proof Tested to 2 times the Working Load Limit with certification • Company name (CrosbyIP), logo, Working Load Limit and jaw opening permanently stamped on body • Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty logbook • Full 180º turning range for material transfer, turning or moving • Lock open, lock closed ability with latch for pretension on material and then release of material • Optional IP-5000 Stinger assembly available • Allows for easy connection between the clamp and hoist hook • Material must be clean and dry • Maintenance replacement kits are available • Manufactured by a ISO 9001 facility • All sizes are RFID EQUIPPED
The IPNM10P vertical lifting clamp is used for the lifting, turning, moving or vertical transfer of sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180 ˚ ) as needed without marring the surface of the material. Materials such as aluminium, stainless steel, painted materials, aircraft skins, composite material, glass, plastic, etc., can be lifted without marring. The protective cover reduces the risk of damage to surrounding plates. Will NOT mar or scratch the material surface.
The IPNM10N vertical lifting clamp is used for the lifting, turning, moving or vertical transfer of sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180 ˚ ) as needed without marring the surface of the material. Materials such as aluminium, stainless steel, painted materials, air- craft skins, composite material, glass, plastic, etc., can be lifted without marring. Will NOT mar or scratch the material surface.
MODEL IPNM10
DIMENSIONS (mm)
WEIGHT EACH (kg.)
WORKING LOAD LIMIT (t)*
IPNM10 STOCK NO. 2703811 2703738 2703442
MODEL
JAW A B C
E F G H K
D
IPNM10N IPNM10N IPNM10N
2.7 4.4 14.5
235 270 396
40 30 70
41 56 16
0.5 1 2
128 134 196
60 80 100
11 10 16
0 - 10 0 - 20 0 - 40
84 110 153
159 209 258
FOR STAINLESS STEEL - WITH UNIVERSAL HOISTING EYE
IPNM10P IPNM10P
0.5 1
2703278 2703279
2.8 4.5
0 - 10 0 - 20
82 97
157 195
213 268
40 30
145 205
68 82
48 60
11 10
FOR VERY HARD MATERIALS - WITH UNIVERSAL HOISTING EYE
IPNM10NJ
1 2703814 5.5 20-37 86 196 265 30 177 80 51 10
*Design Factor based on EN 13155 and ASME B30.20.
LIFTING SALES DEPARTMENT
+2711 030 0400 | sales@shutterlock.co.za
Made with FlippingBook - Online magazine maker