HORIZONTAL PLATE & BEAM CLAMPS
This IPTK series beam clamp is suitable for use as a temporary tackle eye for a beam. The IPBKZ beam clamp is used for lifting, transfer and stacking of H-Beams. An over-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in the vertical and horizontal moving, transfer and stacking of different types of structural designs, such as H-Beams, angles, etc., depending on the application desired. The IPH10 horizontal lifting clamps with spring loaded tension have a pre-tension feature that allows the user to attach the clamps to the material for horizon- tal lifting and transfer of non-sagging material. These clamps must be used in pairs or more.
The IPHGZ, IPHGUZ horizontal clamps have a pretension locking feature that allows the user to attach the clamps to the material for horizon- tal lifting and transfer of sagging and non-sagging material. These clamps may also be used to handle material that will be used in shears, bend- ing and rolling machines or other fabrication equip- ment. May also be used to move and lift struct ural shapes such as I-Beams, H-Beams etc. The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is slotted to allow the clamps to be used from end of beams as well as from the flange. This series of clamps can be used in the vertical and horizontal moving, transfer and stacking of different types of structural designs, such as I-Beams, H-Beams, angles, etc., depending on the application desired. The IPSTARTEC11 beam clamp has been specially developed for lifting with the body in vertical position, controlled tilting, trans- portation and stacking of steel “H” and “I” profiles. By placing the chain guide in the appropriate position, it is easy to switch from lifting to tilting and back again, which shifts the centre of gravity. The IPU10/A automatically click on to the material as soon as the clamp is places on the plate. The fact that the safety lock re- mains in position as the clamp closes pre- cludes hazardous situation. Fastening the IPU10/A clamp in places that are difficult to reach is no problem.
The IPVK drum clamp is for vertical lift and transfer. Automatically locks on drum, and can be used alone or in pairs.
MODEL IPH10
16 20 25
20 20 20
2 3 6
2703522 2703523 2703525
5.5 7.5 13.0
0 - 60 0 - 60 0 - 60
117 117 143
- - -
22 26 36
109 109 123
256 266 320
110 120 130
40 48 48
IPH10 IPH10 IPH10
MODEL IPHGUZ - FIXED HOISTING EYE
20
IPHGUZ
1.5
2705455
9.0 0 - 25 110 232 287 70 139 90
-
16
MODEL IPBKZ
IPBKZ
1.5
2705781
7.0 5 -25 62 210 300 70 163 61 50 16 -
MODEL IPBHZ
60 80
6.0 10.5
200 227
1.5 3
2705462 2705463
0 - 25 0 - 40
255 325
50 70
153 188
73 112
- -
35 38
28 32
IPBHZ IPBHZ
MODEL IPTK - WITH HOISTING EYE
- -
- -
6.0 11.0
75 - 190 120 - 350
125 125
- -
IPTK IPTK
2700996 2700994
2 5
- -
A + 80 A + 195
75 75
25 40
20 20
MODEL IPSTARTEC11
IPSTARTEC11
1.5
2701812
6.6 6 - 12 140 39 575 110 81 129 54 126 16
DRUM CLAMP - MODEL IPVK
1.6
17 26 26 132 29
11
-
-
IPVK
0.5
2700116
-
51
CROSBY IP CLAMP MISC. - MODEL IPU10/A - FOR VERTICAL TRANSPORT OF PLATES
IPU10/A
1
2701628
2.3
0 - 20
45
138
238
40
128
41
37
-
11
LIFTING SALES DEPARTMENT
+2711 030 0400 | sales@shutterlock.co.za
Made with FlippingBook - Online magazine maker