SOCKETS FOR STEEL WIRE ROPE - G-416/G-417
OPEN SPELTER SOCKETS • Forged Steel Sockets through 38mm, cast alloy steel 40mm through 102mm
• Spelter socket terminations have an efficiency rating of 100%, based on the catalogue strength of wire rope • Ratings are based on recommended use with 6 x 7, 6 x 19, or 6x 36, IPS or XIP (EIP), XXIP (EEIP), RRL, FC, or IWRC wire rope • Strand constructed with minimal number of wires (e.g. 1x7) requires special consideration that socket basket length be five times the strand diameter or fifty times the wire diameter, whichever is the greater NOTICE: All cast steel sockets 40mm and larger are magnetic particle inspected and ultrasonic inspected. Proof testing available on special order. Drawing illustrates one groove used on sockets 6mm through 19mm. Sizes 20mm through 38mm use 2 grooves. Sizes 40mm and larger use 3 grooves.
Open Grooved Sockets meet the performance requirements of Federal Specification RR-S-550E, Type A, except for those provisions required of the contractor. For additional information consult Shutterlock (Pty) Ltd.
. NOTE: AVAILABLE WITH BOLT NUT AND COTTER.
CLOSED SPELTER SOCKETS • Forged Steel Sockets through 38mm, cast alloy steel 40mm through 102mm
• Spelter socket terminations have an efficiency rating of 100%, based on the catalogue strength of wire rope • Ratings are based on recommended use with 6 x 7, 6 x 19, or 6x 36, IPS or XIP (EIP), XXIP (EEIP), RRL, FC, or IWRC wire rope • Strand constructed with minimal number of wires (e.g. 1x7) requires special consideration that socket basket length be five times the strand diameter or fifty times the wire diameter, whichever is the greater NOTICE: All cast steel sockets 40mm and larger are magnetic particle inspected and ultrasonic inspected. Proof testing available on special order. Drawing illustrates one groove used on sockets 6mm through 19mm. Sizes 20mm through 38mm use 2 grooves. Sizes 40mm and larger use 3 grooves.
Closed Grooved Sockets meet the performance requirements of Federal Specification RR-S- 550E, Type A, except for those provisions required of the contractor. For additional information consult Shutterlock (Pty) Ltd.
WIRELOCK ® RESIN KITS • WIRELOCK ® is designed to gel (Change from a liquid to a solid) in approximately 20 minutes at 18ºC • WIRELOCK ® Wire Rope Assemblies are 100% efficient when used with steel wire rope, galvanised wire rope and stainless steel wire ropes. We do not advise the use of stainless steel wire rope in a salt marine environment without regular inspection
LIFTING SALES DEPARTMENT
+2711 030 0400 | sales@shutterlock.co.za
Made with FlippingBook - Online magazine maker