COMPLIANT LIFTING SHACKLES
45º Markings Manufacturer’s Name (1.) Size of Shackle Material Grade (2.)
45º Markings
Working Load Limit (3.)
Quic-Check
PIC (4.)
Pin Traceability
(5.)
The following detail as prescribed by relevant standards shall be permanently & legibly marked on each shackle:
1. Name, Trade Name or Trademark of the Manufacturer 2. Steel grade number 3. Working load limit (WLL) in ton 4. Traceability or batch code 5. Pin traceability or batch code
Raised Pad for Hard Stamping
Country of Origin 3rd Party Approval (Quality Control)
CE Marking
DIRECTION OF LIFT
100% WLL
100% WLL
70% WLL
70% WLL
70% WLL
70% WLL
50% WLL
50% WLL
Compliance • Meets and exceeds all requirements of ASME B30.26. • Federal Specification RR-C-271F • EN Standard - Directive 2009/104/EC use for work equipment.
COMMERCIAL QUALITY SHACKLES DO NOT COMPLY DO NOT USE!
LIFTING SALES DEPARTMENT
+2711 030 0400 | sales@shutterlock.co.za
Made with FlippingBook - Online magazine maker