VERTICAL ROPE GREASER ASSEMBLY
The vertical rope greaser assembly must be securely elevated with the slings before use. The vertical rope greaser assembly is used by placing the polyurethane insert over the steel wire rope which is then secured between the two halves of the assembly. Rope lubricant is then poured into the rope greaser. The steel wire rope is then pulled through thebarrel and insert which will lubricate the rope. The polyurethane insert prevents any excess lubricant from being used/wasted.
FEATURES: • Supplied complete with 2 x 1m long chain slings. • Applications can only be used with steel wire rope.
• 13mm to 60mm wire rope can be used with the greaser assembly. • Polyurethane inserts must be used with the correct steel wire rope size. • A 3mm rubber seal is incorporated between the 2 halves of the assembly. • 23 Diameter lifting lugs are available on each halve of the assembly.
A2
A
A
F
G
POLYURETHANE INSERTS
DIMENSIONS (mm)
WEIGHT EACH (kg)
CHAIN DIAMETER (mm)
CHAIN LENGTH (m)
PRODUCT CODE
A2
B
D
F
H
C
E
G
I
ROPEGREASER-V(ASSY)
1
590 460
460
104 162 180 160 502
22
8
580
LIFTING SALES DEPARTMENT
+2711 030 0400 | sales@shutterlock.co.za
Made with FlippingBook - Online magazine maker