MINE-AIR KAH-M SERIES MINING AIR HOISTS
KAH M200 2T/2T KAH M300 3T/3T KAH M400 4T/4T
KAH M630 6T/3T KAH M800 8T/4T
KAH M 10T KAH M 12T
OPTIONAL TOGGLE CONTROL
FEATURES:
• Designed, manufactured, certified & tested in compliance with SANS 1638.
• Design registered under the Design Act of 1993.
• 5:1 Factor of Safety at WLL rating.
• Designed for vertical lifting & horizontal pulling except for KAH M10T & KAH M12T vertical lifting models.
• Designed to perform at WLL in the working air pressure range of 3.5 - 6.3 bar.
• Zinc plated, corrosion & abrasion resistant, case-hardened, 12.5mm diameter Grade 80 DAT Load Chain in conformance with SANS 3077, exceeds 6:1 factor of safety.
• Pendant Control operation to isolate operator from the suspension zone and load path or optional chain type toggle control.
• Remote air connection for safety in the event that the main air supply hose becomes disconnected or damaged whilst under pres- sure on pendant control models.
• Automatic, internal, Air Motor lubricator provides Air Motor lubrication & corrosion resistance for 250 operating hours.
• All models incorporate a factory pre-set, direct acting style, load limiter in accordance with the provisions of clauses 4.1.8 & Annex C, C.1 of SANS 1638.
LIFTING SALES DEPARTMENT
+2711 030 0400 | sales@shutterlock.co.za
Made with FlippingBook - Online magazine maker